Home > Applications > Healthcare facilities & best practice

Healthcare facilities & best practice

print this page

Healthcare facilites requies a lot of cautious preparation, and fire rated walls are numérous !

Cable management and new addings are subjet to many challenges :

  • Neusocomial risks
  • Dust and debris managements 
  • Noise, 
  • Disruption time...  

Unmatched flexibility for physical infrastructure, cost and time can be cut with a flexible cable management system while increasing security and hygiene.

With EZ-Path, Fire-rated walls are  no longer issues.

 

Regardless of how well they are managed – traditional firestopping  will create dust, debris and other airborne particulate matter. Unlike most open-air construction sites, dust and debris in the air can pose life-threatening conditions in hospitals and other patient care facilities.

As hospitals continue to require more stringent containment precautions during routine construction

        Adding cables or just removing the existing ones , EZ-Path is a secure system : no trainning needed, easy  to perform and toolless .With no critical installation decisions, no materials to remove or reinstall, EZ-Path® takes the human element away and makes cable protection fail-safe!
         

        This system is clean, no more dust nor debris in plenums! With the EZ-Path® System, firestopping is a one-time event! No sealant, putty, or foam pads to remove and replace. Nothing to adjust. Nothing to loosen and re-tighten

         

        No need to have acces on both side of the wall

        No need to touch the wall or the device !

        We recommand to let a pulling line ready tu use.

         

          No need to pop that ceiling tile!
        Where other firestopping methods require acces to both side of the wall at every cable change.
        With nothing to remove or replace the EZ-Path System allows remote cable pulls using a pulling line

         

         

        EZ-PATH® is a mechanical system which provides a fire rated pathway for Power and Data cabling

        Always compliant with the fire-stopping regulation, EZ-Path is also FM Approved certified assembly. No needs for further opening or penetration through the fire resistive wall. Contractors and maintenance teams now have a simple and certified pathway to use, and no specific training required.
         

         

         

         

        In case of fire it has the right amount of intumescent material to stop fire and smoke whether it is 100 % filled or empty. At 180 C° the intumescent material will expend and fill the pathway and stop the fire.